1.6m large vertical lathes
110 Large Boring Machine
130 Large Boring Machine
KH63G horizontal machining center
80G Horizontal machining center
STEEL CASTING SERVICE PROCESS
pouring_simulation
A review meeting is held within the technical department to review the specific details, determine the gating system and verify it through the simulation system software MAGMA.
model_develop
The technical department develops the mould, and the quality department uses the coordinate measuring machine to carry out the dimensional inspection.
0V0A0431
All metal materials are 100% inspected by the QA team. Unqualified materials are strictly prohibited from entering the warehouse.
wax
There is currently one wax pattern shift. The workshop uses an automatic waxing machine to set the waxing pressure, holding time, and etc.
mold
The workshop has 4 automatic production lines and can produce 1800 sets of shells. We use hygrothermograph, aerometer and PH monitor for monitoring the humiture and the concentration of liquor aluminum chloride.
pouring
Four 500KG furnaces cast at the same time, and three additional 500KG furnaces are ready for use when capacity increases. The operators measure the temperature of the molten steel.
cleaning
The workshop is fully equipped with 8 heat treatment furnaces, 3 quenching furnaces, 1 central shot blasting machine and 11 large shot blasting machines.
workshop_control
The technical department develops workshop control plans and product operations guide book, and there are specialists who check each parameter on a daily basis. The target is inspected and kept on record.
_JC[H94~K0ORML7)`E]VQ8A
All blanks' dimensions are checked by using CMMs. We have a wide range of equipments for inspections. The company's quality department has certified employees to do UT, PT, and MT testing.
raw_material_inspec
Methods for product testing include workers‘ self-inspection, first and last inspection, full inspection and other means, in order to ensure the processed products are qualified.
warehouse
The warehouse manager follows the company's finished-product-warehouse management guidelines, classifies and stores according to customer and product requirements, which avoids problems such as product mixing, scratching, or shipment error.
packing
The technical department reviews the packaging requirements and develops instructions. We use the bubble film to isolate the products to ensure no bumps. Specific products can be specially packaged according to customer requirements.
shipping
The information registration of the transportation vehicle shall be checked in, and the product shall be covered by the tarpaulin after the loading.
